Specifications

The Bellofram Type 3210 electro-pneumatic regulators provide a precision pressure output, which is proportional to the user's electrical command signal. The single closed loop controller has a pressure sensor in the manifold block, which will provide accuracy to +/- 0.50% full scale. The reliable twin solenoid valve system requires no air consumption (conserves air - no constant bleed) at steady state output pressure. The CE approved design features a weatherproof housing and can be pipe mounted inline or conveniently on top of a booster relay for higher flows. The model 3210 is not sensitive to mounting orientation.

Output Pressure Range: 0-150 PSIG
Input Command Signal: 0-10 VDC standard (field selectable 4-20 mA)
Flow Rate: 0.7 SCFM @ 180 PSIG Inlet Pressure
Accuracy: 0.5% full scale (0.2% linearity, 0.2% repeatability, 0.5% hysteresis)
Inlet Port: 1/8" female NPT
Outlet Port: 1/8" female NPT (side), 1/4" female NPT (bottom)
Exhaust Port: 10-32 UNF female Thread
Max Supply Pressure: 200 PSIG
Supply Voltage: 15-24 VDC @ 80-325 mA
Impedance : 10K ohms (voltage input), 250 ohms(current input)
Analog Monitor Output: 0-10 VDC
Logic Monitor Output: 0 VDC low, 5 VDC high
Filtration: 40 micron built-in
Temperature Range: 32 °F to 141 °F
Wetted Parts: Brass, nickel, Buna-N, 316 SS
Electrical Connection: 6-Pin micro plug (optional power cord available)
Recalibration: Onboard gain, zero, and span pots
Mounting: Inline pipe mounting
Weight: 1.2 pounds
PDF Data Sheet: Bellofram T3210 Series Regulators